Free Print Subscription Printer-friendly version Email to a Friend

Maxim Introduces PWM Buck Controllers

(Product News, 07 Apr 2005 )

Maxim Integrated Products has introduced the MAX5060/MAX5061 PWM buck controllers. These PWM controllers allow the design of high-output-current, compact power supplies with a minimum number of external components. The devices' internal voltage regulators allow operation from a 5V, 12V, or 24V power bus, while the output voltage is adjustable from 0.6V to 5.5V.

The MAX5060/MAX5061 are well suited for applications requiring up to 30A output current. Multiple DC-DC controller modules can, moreover, be paralleled to achieve higher output currents.

Both devices include an average-current-mode control scheme, which allows designers to achieve current-limit as well as current-sharing accuracy of ±10%. This capability results in a small inductor and small, or fewer, external MOSFETs, thus reducing power-supply size and cost. An external current-sense resistor ensures that ±10% (typical) current-sharing accuracy is maintained between paralleled modules. The current-sense threshold for both devices is only 25mV, which reduces power dissipation in the sense resistor and allows use of a smaller sense resistor (2010 size resistor for a 20A power supply) than competitive solutions. The MAX5060/MAX5061 also limit reverse-current sinking, thus preventing the main power bus (VBUS) from being pulled down when multiple power-supply modules are paralleled.

Both the MAX5060 and MAX5061 include ON/OFF input and external frequency synchronization. Switching frequency is externally programmable from 125kHz to 1.5MHz.

The MAX5060 includes additional features: a clock-output signal to drive a second DC-DC converter 180 degree out-of-phase, a load-monitoring output voltage proportional to the output current, power-good output, over voltage protection, and differential remote-sense pins to ensure precise voltage at the load. A 20A power-supply evaluation kit that measures 42mm x 23mm and achieves 96% peak efficiency is available from the company.

The MAX5060/MAX5061 operate over the -40 degrees Celsius to +125 degrees Celsius temperature range. The MAX5060 is available in a thermally enhanced 28-pin TQFN and priced at $1.66, while the MAX5061 is available in a 16-pin TSSOP package and priced at $1.44 (1000-up, FOB USA).

Maxim Integrated Products : http://www.maxim-ic.com

 
Free Print Subscription Printer-friendly version Email to a Friend
Article Rating 
Average Rate: No rating yet
 
Poor Quite Good Good Very Good Excellent
 
 
Related Content 
 
 
ADVERTISEMENT
 
 
ON-DEMAND WEBCASTS
 
RESOURCE CENTER
 
Highest Rated  
 
 
 
 
 
ADVERTISEMENT
 
 
 
 
 
 
 


RSS
   
   
   
   
   
   
   
   
   
   
   
   
   
   
   
   
   
   
   
   
   

POLL
What type of environmental regulation do you think will be most beneficial for the tech industry?
Proper recycling and disposal
Push for power efficiency and energy conservation
Chemical/lead regulation
View results

 
 
 

 
 
Power Technology E-newsletter 
Strategic Collaboration to Focus on Smart Grid R&D in Singapore EDNA, August 10
Shortages Seen in Power Managament ICs during 1H10 EDNA, July 10
STMicroelectronics and Micropelt Demo "Perpetual Energy" Thermoharvesting Power Supply EDNA, June 10
Device Simplifies Design of Buck and Buck-boost HB LED Drivers EDNA, May 10
 
Analog E-newsletter 
12V Dual-channel Synchronous Buck Converter Features Integrated FETs
EDNA, February 10
Power MOSFETs features reduced top-side thermal impedanc
EDNA, January 10
 

 
KNOWLEDGE CENTER
 
Texas Instruments: DaVinci™ Technology
 
Texas Instruments: Safe Bet Series
 
 
INDUSTRY LINKS
 
Photonics Association (Singapore)
Singapore Industrial Automation Association (SIAA)
Taiwan Semiconductor Industry Association (TSIA)
 
 


 
 
OUR SPONSORS
 






Keithley Instruments
With more than 60 years of measurement expertise, Keithley Instruments has become a world leader in advanced electrical test instruments and systems from DC to RF (radio frequency). Our products solve emerging measurement needs in production testing, process monitoring, product development, and research...
 
 
     
 



Canon Communications Asia
EDN India | EDN Taiwan | EDN Korea | EDN Japan | EDN China | EDN | EDN Europe

 
ABOUT EDN Asia | FREE SUBSCRIPTION | CONTACT US
   
© 2010 Canon Communications
All rights reserved. Use of this web site is subject to its Terms and Conditions of Use. View our Privacy Policy.