Bookmark and Share Printer-friendly version Email to a Friend

Solar Panel Glut Peaks in Mid-2009

(Business News, 16 Nov 2009 )

Although the global solar panel market remains in an acute state of oversupply, the inventory glut plaguing the industry has begun to abate somewhat due to surprisingly strong demand from Germany, according to iSuppli Corp.

“Solar-panel installations in Germany began surging to record levels in July as prices for Photovoltaic (PV) systems plunged,” said Dr. Henning Wicht, senior director of photovoltaics research for iSuppli. “This phenomenon has boosted the global solar panel business and mitigated the severe oversupply situation that has stung the industry throughout this year.”

iSuppli now is forecasting that Germany will install 2.5GW worth of solar panels in 2009, compared to its earlier forecast of 1.53GW. This will help drive worldwide demand for solar panels to 5.2GW in 2009, up from iSuppli’s former expectation of 3.9GW.

Nevertheless, global demand for solar panels still is expected to fall by 3.8 percent in 2009 compared to 2008, a dramatic change from the double-digit growth seen in recent years.

PV prices plummet
The global PV market entered a severe downturn in early 2009 due to a sharp decline in expected installations in Spain. With suppliers ramping up production at a rapid pace, the drop in demand triggered a severe inventory pileup that caused prices to fall. Prices for solar systems in July fell by 20 percent compared to the beginning of the year.

The German market seized on these attractive prices, spurring the massive increase in sales.

Glut remains in 2009…
The rise in German sales means that the global supply of solar panels now is expected to exceed demand by 65.9 percent in 2009, down from iSuppli’s previous forecast announced in August of a 91.9 percent overage.

...but will it last into 2010?
The real impact of the German rebound will come in the year 2010 and beyond.

Based on the massive oversupply situation in early 2009, it appeared that the panel glut would persist through the year 2010. However, with Germany exhibiting strong demand elasticity in the face of price reductions, the glut could be resolved as soon as next year, depending on how the industry reacts.

“Supply and demand dynamics in the fourth quarter will set the tone on whether the oversupply situation continues in 2010,” Wicht said. “If panel makers reduce production during the fourth quarter of this year, anticipating the seasonally weak first quarter in Germany, then supply and prices could stabilize.”

To maintain the investor momentum in the largest national market—Germany—system prices must be reduced by 10 percent again in 2010. Distributors and wholesalers already are preparing for the first quarter by announcing price reductions for 2010. This will help prevent a stall in sales, such as what occurred in spring 2009.

If the industry manufactures at its full capacity, there would be a panel oversupply of 75 percent in 2010 compared to expected installations. However, manufacturers are not expected to produce at full capacity due to issues including inventories, further strategy shifts, manufacturing cuts and consolidation, reducing the expected level of oversupply.

iSuppli


RELATED ARTICLES
Applied Materials Opens Advanced Solar Research Facility in China

Synopsys Sentaurus TCAD Used to Simulate Solar Cell Performance Characteristics at NREL

Applied Materials Baccini Esatto Technology Enables Higher Efficiency Solar Cells

India Plans Massive Increase in Solar Energy

First Solar to Produce Twice as Much as Leading Crystalline Solar Module Suppliers in 2009

 
Printer-friendly version Email to a Friend
Article Rating 
Average Rate: No rating yet
 
Poor Quite Good Good Very Good Excellent
 
 
Related Content 
 
 
ADVERTISEMENT
 
 
ON-DEMAND WEBCASTS

 
Highest Rated  
 
 
 
 
ADVERTISEMENT
 
 


TECHNOLOGY NEWS
 
 
 
PRODUCT NEWS
 
FEATURED SPONSORS
 
 
 
DESIGN CENTERS
 
ADVERTISEMENT
 
     
CURRENT ISSUE
 
COVER STORY:

Analog design in the 21st century: challenges, tools, and IC advances

We are now more than a decade into the 21st century, and on an ever-accelerating fast track to technological innovation in electronics. The transistor and progression into the IC, or microchip, lit the fuse leading to the explosion of innovations in electronics that is now taking place. Since the wi ...
HIGHLIGHTS:
SPECIAL REPORT
DESIGN FEATURES
 
PULSE
 
 
 
 


 


RSS
   
   
   
   
   
   
   
   
   
   
   
   
   
   
   
   
   
   
   
   
   

POLL
What type of environmental regulation do you think will be most beneficial for the tech industry?
Proper recycling and disposal
Push for power efficiency and energy conservation
Chemical/lead regulation
View results

 
 
 
 
 
 
Power Technology E-newsletter 
Power.org Releases Power Architecture 32-bit Application Binary Interface Supplement
EDNA, May 11
POL Regulators Designed for Energy-efficient Computing
EDNA, March 11
Fairchild Revolutionizes Power Savings
EDNA, January 11
Lattice Transforms Board Power and Digital Management
EDNA, November 10
 
Analog E-newsletter 
12V Dual-channel Synchronous Buck Converter Features Integrated FETs
EDNA, February 10
Power MOSFETs features reduced top-side thermal impedanc
EDNA, January 10
 

 
KNOWLEDGE CENTER
 
Texas Instruments: DaVinci™ Technology
 
Texas Instruments: Safe Bet Series
 
 
INDUSTRY LINKS
 
Photonics Association (Singapore)
Singapore Industrial Automation Association (SIAA)
Taiwan Semiconductor Industry Association (TSIA)
 
 
 
 
OUR SPONSORS
 







Keithley Instruments
With more than 60 years of measurement expertise, Keithley Instruments has become a world leader in advanced electrical test instruments and systems from DC to RF (radio frequency). Our products solve emerging measurement needs in production testing, process monitoring, product development, and research...
 
 
 
     
 

EDN India | EDN Taiwan | EDN Korea | EDN Japan | EDN China | EDN | EDN Europe

 
ABOUT EDN Asia | | CONTACT US
   
© 2012 EDN Asia All rights reserved.