The AS1340 delivers 50mA at 24V or 30mA at 36V from a single Li-Ion cell and can provide adjustable output voltages in the range of 2.7 to 50V. The AS1340 operates from a single 2.7 to 5.5V supply. Additionally ....
Aiming at portable, handheld systems, this family of low-capacitance diode-array devices provides ESD (electrostatic-discharge) and clamping protection. The devices use the vendor’s TVS2 (transient-voltage-protection ....
An advanced architecture and package design allow the NP180N04TUG power MOSFET a 1.5-mΩ maximum on-resistance and operates at a 40V drain-to-source voltage and 180A. Rated for single- and repetitive-avalanche ....
The TPCA8A02-H and TPCA8A03-H MOSBD (MOSFET/Schottky-barrier-diode) devices eliminate external wiring between the MOSFET and the diodes for increased power efficiency and reduce wiring resistance and ....
Suiting USB charge protection in portable and consumer devices, the NCP361 overvoltage-protection controller uses an internal P-channel FET requiring no external devices. In the event of overvoltage from ....
The bq2412x series are highly integrated, synchronous, switch-mode charge management devices for single- or two-cell Li-Ion and Li-Pol battery packs. The device charges the battery in three phases: conditioning, ....
The Flex-XC-KIT is suited for evaluation and verification of FlexRay applications based on Infineon’s powerful XC2000 microcontroller family. Featured by extensive peripherals this 16-bit architecture ....
LeCroy has expanded its M-Type oscilloscope lineup to include six new models ranging from 200MHz to 2GHz. Each comes standard with a full set of analysis tools including WaveScan, an advanced search & ....
This Automated Optical Inspection (AOI) platform is fully qualified for all areas of surface mount technology (SMT) line inspection, including post-, pre- and 2-D capabilities. Developed to tackle today's ....
The R&S ZVA50 is said to be the world's first four-port network analyzer up to 50GHz. Featuring two integrated sources, the analyzer makes it possible for the first time to perform measurements on multiport ....
