Coventor has merged its Coventor and MEMS+ tools into a unified platform perfect for IoT makers, according to Steve Breit, VP of the company's MEMS bu...
The overall average lifetime of manufacturing equipment is growing, and designers need to utilise and deploy components that will work reliably for de...
The TTR500 Series offers a full 2-port, 2-path S-parameter VNA for applications such as measuring passive/active components, antennas and matching net...
The caveat is that the op-amps need 1K pull-up resistors from their outputs at U1 and U4 to the positive rail to ensure it will always start up.
A single change to the RISC-V instruction set architecture specification may eliminate the failures, according to the foundation.
The CTC 101 kit supports programming and mechatronics with five themed modules and reusable parts, allowing experiments to be reconfigured.
The circuit implements auto-exposure control, allowing the sensor to generate an RGB triplet over a high dynamic range.
A new approach to creating nonstandard resistor values may find wide use in a range of applications.
The 802.11ax standard requires that all STA devices transmit within 400ns of each other, with the synchronisation provided by a trigger frame.
In anticipation of such a part failure, one may include a shunt resistance from the slider connection to a safe and predictable voltage.