With consumers demanding accurate and longest possible battery run-time for wearables, the author talk about managing battery capacity and Maxim's Mod...
Maxim engineers present the the MAX17055 stand-alone single cell pack, fuel gauge IC, which has the EZ algorithm is built into it.
The TB67S111PG incorporates four channels of each low-side MOSFET and regenerative common diode, according to Toshiba.
The design of CoolMOS P7 devices adds new algorithms to minimise the switching frequency spread between different line conditions.
Will throwing some capacitance across a 240V AC line absorb the interfering audio-band line noise from the heat pump? Maybe.
The Efficient Power Conversion team is leading the GaN power element development toward the creation of a growing set of industry apps.
Gallium Nitride FETs have a decided advantage over silicon FETs because they much higher conductivity and smaller size.
In anticipation of such a part failure, one may include a shunt resistance from the slider connection to a safe and predictable voltage.
The 2.5mm x 2mm winding inductors from the LQH2HPN_DR series are intended for wearable devices, according to Murata.
The PR02-FS offers a resistance range from 1Ω to 100Ω with tolerance down to ±10% and rated power dissipation of 2W at 70°C.