Reference designs, such as the one introduced by Texas Instruments, enable designers to add their talent and creativity to reach new levels of power t...
This booming market condition for 2017 is due to increased military spending and 14% growth in the satellite market.
In a 60W flyback schematic operating at 250kHz, the duty-cycle is selected to be 50% maximum at the minimum input voltage of 51V and maximum load.
In designing a CCM flyback converter, ceramic capacitors alone are suitable, but seven would be required to realise 83µF after DC-biasing effects.
Designs often require an isolated power supply along with data isolation. Here are the first of the steps you need to know to effectively use products...
One way of minimising the current loop is to include a high-voltage capacitor from side 1 to side 2, and place it as close to the IC as possible.
In the final steps to minimise radiated emissions, the authors talk about using common-mode chokes and the need for careful measurement.
The AEC-Q100 qualified LM5170-Q1 features integrated 5A peak half-bridge gate drivers for high power capability, according to TI.
TI’s embedded processors and technology expertise have been tapped to help build fast-charging stations with high power-handling capabilities.
TI’s 2S1P BMS reference design turns a drone’s battery into a smart diagnostic black box recorder to monitor remaining capacity and protect battery.