Applying security principles to building automation
Building automation is shifting from proprietary networks to IP networks, creating a large impact on network management as there will be an influx of Building IoT devices on the network...
Why component integration matters for space-based PLL synthesizers
By integrating RF and synthesizer components into a monolithic RF IC, engineers can solve size and complexity design challenges in spaceborne applications...
SoC designs crack the code on connected medical devices
Medical device designers are finally turning the corner with the IoT, thanks to advances in SoC designs that reduce power consumption, lower costs, and shrink device size...
Stylish AIO POS with 3-inch Thermal Printer
Clientron Debuts the Essential POS Terminal - PSL540 Built with 3-inch Printer...
Wide Temperature Wireless IoT Gateway for Better Connectivity
Artila’s wireless IoT gateway Matrix-702 is a low-power consumption, cost-efficient choice, as a data transmission from wired to wireless network, for various remote monitoring applications...
Resolving Interference in a Crowded Wi-Fi Environment Using BAW Filters (Part 2)
This is the second blog post in a 2-part series looking at design challenges for Wi-Fi front-end designs. Part 1 covered thermal considerations.
How Not to Run Hot: Overcoming Thermal Challenges in Wi-Fi Front-End Designs (Part 1)
This is the first of a two-part blog series that looks at the design challenges for Wi-Fi front-end designs.