With rapidly-growing wireless IoT deployments and the increasing use of existing license free spectrum, LPWAN solutions will experience extensive Quality-of-Service and scalability challenges.
The number of IoT (Internet of Things) devices is expected to grow continuously on a global scale: the most recent estimates assume that by 2020 there will be over 30 billion connected devices. A certainly noteworthy figure, which requires design choices to which the developers of the devices and the infrastructure for communication must adapt. These choices impact on the scalability and energy efficiency of the devices, with reflections on the type of technology used to achieve connectivity towards the IoT network concentrator (or gateway).
Within the Internet of Things, connectivity between objects (Things) and the network (Internet) is clearly needed. For applications that require small territorial coverage, we are familiar with the Bluetooth Low Energy (BLE) and ZigBee standards, which fall within the broader category of Personal Area Networks (PAN). For applications that instead have the need to cover larger areas, it is necessary to use a Wide Area Network (WAN) or better, within the IoT, a Low Power WAN (LPWAN). LPWAN technology is very suitable for connecting devices that need to send small amounts of data over long distances while allowing a long battery life.
The new LPWAN technologies operate at frequencies included in the ISM (Industrial, Scientific, Medical) license-free bands. Unlike mobile network operators, therefore, LPWAN network operators do not have to buy expensive licenses for the assignment of radio spectrum bands. LoRaWAN is an LPWAN specification that allows battery-powered devices to connect to an IoT network over a long-range, using low bandwidth, in a regional, national or global network.
The Low-Power Wide-Area Network (LPWAN) is a type of wireless telecommunications network designed to allow long-range communications with low bit rates. LPWAN technology is designed for machine-to-machine (M2M) network environments. With a decrease in power requirements, a greater range and a lower cost compared to a mobile network, LPWAN networks are designed to allow a more extensive range of M2M applications and Internet of Things, which are often constrained by budget and power problems.
The most well-known LPWAN is LoRaWAN for wireless connection of objects via a regional, national, or global network. The LoRaWAN specification provides interoperability between intelligent objects, without the need for complex local installations and provides freedom for the user, developers, and companies to develop the Internet of Things.
Connectivity for IoT
LoRA is a wireless technology for long-distance communication that is emerging as one of the leading solutions to realize the IoT infrastructure. Distinguished by reduced power absorption and low data transfer rates, LoRA is used by IoT devices connected to network end-points to communicate with internet-connected gateways. The gateways behave like real bridges, allowing full interaction between the end-point devices and a central network server.
LoRA technology uses two distinct layers:
The LoRA physical layer, developed by the company Semtech, allows long-range communications using low-power devices and requiring very low bandwidth. LoRaWAN is instead a protocol that allows multiple IoT endpoints to communicate with a gateway using LoRA technology. While the LoRA modulation technique is proprietary, LoRaWAN is an open standard, developed by the LoRa Alliance itself. The typical structure of a LoRA network is based on a star topology, with the presence of three different types of devices, as shown in Figure 1.
The LoRA physical level
Although proprietary, LoRA uses a chirp spread spectrum (CSS) modulation, based on the use of chirp (signals whose frequency increases or decreases over time) for information encoding. By the high linearity of the chirp pulses, the frequency offsets between the receiver and the transmitter are equivalent to temporal offsets, easily eliminated in the decoding circuit. This aspect also makes the modulation immune to the Doppler effect, corresponding to a frequency offset. Figure 2 shows the typical waveform of a chirp. On the axis of the abscissas is indicated the time, while on the axis of the ordinates the amplitude; note that the frequency is not constant but varies over time.
The parameters that affect the LoRA modulation are as follows:
The LoRA frame primarily involves a preamble, which begins with a constant sequence of chirps with increasing frequency covering the entire frequency range. The last two chirps identify the sync word, a single byte used to differentiate LoRA networks that use the same frequency bands. An end-point device configured with a specific sync word will ignore any message received if the associated sync word does not match the configured one. The sync word is followed by 2.25 chirp. The total duration of the preamble can be configured between 10.25 and 65539.25 symbols. After the preamble, is transmitted (optionally) the header: when present, the header has a code rate of 4/8. The payload (with a maximum length of 255 bytes) is transmitted after the header and is followed by a CRC (optional).
The LoRAWAN protocol
The LoRaWAN network has a star-shaped, or rather, star-like architecture. Unlike a mesh network (mesh network) in which individual nodes receive and retransmit information from adjacent nodes in order to increase the coverage area of the network (with the disadvantage of keeping all network components awake in order to handle information that is in most cases irrelevant to themselves), in a LoRa network the terminal nodes are most often “sleeping”.
LoRaWAN is a MAC protocol based on the physical level offered by LoRA and designed to support sensor networks. The main components of a LoRaWAN network are as follows:
LoRa Gateways are the interface to endpoints. The messages received from the endpoints are in turn transferred to another unit that has the function of Network Server. In general, the connection to the Network Server is made via a standard IP connection, and public or private networks can be used. The Gateway will send the messages to the endpoints if the server has something to say to the remote devices.
LoRa Network Server is the unit that manages the network. The network server fulfills all the tasks foreseen by the LoRaWAN protocol, such as, for example, that of eliminating duplicate packets (the messages of an endpoint can be picked up by several gateways simultaneously), adapting the data rate between the various nodes, send the data to the relevant applications (Figure 3).
MYTHINGS, a new LoRA?
MYTHINGS by BehrTech is a wireless connectivity platform explicitly designed for large-scale industrial and commercial IoT networks. At the heart of MYTHINGS there is MIOTYTM (TS-UNB), the only low-power, wide area network (LPWAN) technology standardized by ETSI (TS 103-357) for robustness, capacity, and energy efficiency at the production level. With a unique interoperability approach, the MYTHINGS platform can be easily integrated into any legacy environment, reducing cost and complexity, while promoting control and ownership of data in IoT distributions (Figure 4).
With a range of over 15 km, only a few MYTHINGS base stations are needed for full coverage in vast areas like industrial complexes, campuses or oilfields.
According to ABI Research, in the next years, license-free LPWAN technologies will be for over 70% percent of the market. This glimpse into the future stresses the significance of interference resilience as the key to Quality-of-Service (QoS) and the future viability of these solutions. BehrTech has conducted a study to evaluate and compare the real-world QoS of MYTHINGS and LoRa. The study measured network performance, defined by Packet Error Rate (PER), under interference conditions. PER is the percentage of failed transmissions out of total sent messages (figure 5 and 6).
“In the dense interference scenario, there was a significant difference in the quality-of-service between MYTHINGS and LoRa,” said Professor Dr. Thomas Lauterbach. “Observing both networks at the same signal power, MYTHINGS successfully delivered all messages while the LoRa network lost more than 10 percent of its messages. Even when signal power was increased, there was a four to five percent packet error rate in the LoRa system.”
MYTHINGS with the ETSI standard TS-UNB at its core can deliver an entirely new level of QoS for future-proof, next-gen IoT networks. According this study, MYTHINGS offers significantly higher interference resilience in the license-free spectrum compared to LoRa, providing robust and future-proof connectivity as device traffic exponentially grows.
The LPWAN networks will have a large diffusion in the world of the Internet of things, especially where transmission coverage of several kilometers and low consumption are required. With rapidly-growing wireless IoT deployments and the increasing use of existing license free spectrum, LPWAN solutions will experience extensive Quality-of-Service and scalability challenges.
The innovative features of LPWAN include support to guarantee connection redundancy, geolocation, low cost and low power with the possibility of exploiting energy harvesting technologies that allow the mobility and ease of use of the Internet of things.