Whitepaper

2020-03-31 -

iCAP-Tackling the Main Challenges of Large-scale IoT Deployment

Using iCAP, the system integrator can gather all connected IoT devices under one umbrella. This is beneficial as we move towards a future where human labor is increasingly replaced by automation due to streamlining and cost reduction. This drastic change in device-to-operator ratio brings with it challenges regarding device maintenance and monitoring, as well as […]

2020-03-24 -

Strategy Analytics: Understand how Arm geared up in IoT Indurstry, to be the pioneer of the industry

One of the major IoT adoption challenges is the cost, simplicity, and security of implementing devices at scale. While the industry has moved forward in offering device and connectivity platforms that simplify the effective monitoring and management of thousands of devices, it is clear that much deeper cross-industry partnerships are still required in order to […]

2020-03-11 -

Artesyn’s New High Efficiency 1300-Watt Quarter-brick with Digital Control for Telecom and Compute Equipment

The BDQ1300 series quarter-brick is an isolated DC-DC converter that produces a single 12V nominal output. Rated at 1300 watts, this converter can deliver up to 107 amps output current and has no minimum load requirement. It has an input voltage range of 40 to 60 V and is primarily designed for use with standard […]

2020-03-11 -

Artesyn’s New Artesyn 50-Watt, High Current Density, Non-isolated Digital DC-DC Modules are Ideal for 5G Nodes and Height-sensitive Applications

The LGA50D is a non-isolated DC-DC converter that is designed for cost and space sensitive applications. This non-isolated unit offers two independent and configurable 25 amp, 50 watt outputs, which can also be combined to a single configurable 50 amp, 100 watt output. With a footprint of 1 x 0.5 inches or 25.4 x 12.5 […]

2020-03-10 -

How high speed data converters enable flexible RF sampling architectures

Digital transceivers have for many years been used in a wide variety of applications, including terrestrial cellular networks, satellite communications and radar-based surveillance and Earth observation and monitoring. Their capabilities will have a direct impact on the efficiency and system cost of new 5G mobile networks. Traditionally, transceiver system engineers have used intermediate frequency architectures […]

2020-03-05 -

AMPMODU 2mm BOARD-TO-BOARD RECEPTACLES

AMPMODU 2mm Board-to-Board receptacles utilize phosphor bronze contacts with dual cantilever beams that are available in either gold or tin plating. The dual-beam design provides for an increased contact surface between the header pin and the receptacle contact to allow reliable signal transfer The admin of this site has disabled the download button for this […]

2020-03-05 -

M12 X-CODE FIELD INSTALLABLE CONNECTOR

With TE Connectivity’s latest M12 X-code Field Installable Connector, Installers and Machinery makers can make a Cat6A connection termination error free and tool-less, faster than alternative standard data connector solutions The admin of this site has disabled the download button for this page.

2020-03-05 -

SWFR Single Wall, Heat Shrink Tubing Highly flame-retardant, UL VW-1 rated, Zerohal tubing

SWFR tubing from TE Connectivity (TE) is a cost effective, highly flame-retardant, 2:1 shrink ratio tubing made irradiated, cross-linked polyolefin. It insulates and mechanically protects components, electrical connections, and terminations. The admin of this site has disabled the download button for this page.

2020-03-05 -

Stable in tiny, bring you quality: Barrier Strip Terminal Blocks

Changee Technology,one of the most professional manufacturer and supplier of electrical components in Taiwan. Our strict standards on product quality and perfect cooperation with our clients carry a satisfaction guarantee. With certified by many Taiwan public corporations as approved vendor. Changee Technology provide quality products, fast delivery and competitive pricing. For more product information, please […]

2020-03-05 -

Three ways to adjust power consumption and dissipation in your processing systems

Despite the rising power efficiency of new processors, the accelerating demand for computational power often outstrips the ability to cool the systems down and/or to provide them the right amount of current. Furthermore, mechanical/thermal design usually happens late in the development cycle. Consequently, it is likely to run up against thermal limits late in the […]