Select the right equipment to test and monitor battery temperatures

Article By : Bernard Ang

Battery packs need the required specific power to be able to dispense enough current to achieve the electric vehicle speed performance.

In today’s electronics applications, batteries power nearly all our portable electronic devices. Batteries also serve as emergency power backup systems on large premises. Plus, all-electric vehicles use large cascading battery packs to meet the expected power for the required performance.

Battery packs need the required specific power (W/kg) to be able to dispense enough current to achieve the electric vehicle speed performance. They also need the required specific energy (Wh/kg) to achieve longer runtime or travel range.

Why is it important to monitor battery temperature?

  • If the battery operates at an ambient temperature below 15 °C, you may experience sluggish electrochemical reactions within the battery and as a result, lower battery performance and reduced charge capacity.
  • If the battery or battery pack operates above 35 °C in ambient temperature, battery degradation can accelerate over time. As a result, you may notice shorter battery life, non-uniform aging due to thermal gradients, greater exposure to safety issues, and higher life cycle costs. At extremely hot temperatures, batteries can break down and cause leakage, smoke, fire, and even explosions.

The power map chart below (Figure 1) shows the power limits of lithium-ion battery cell, module, or packs across the temperature range. The range between 15 °C and 35 °C is the optimum operating temperature range for the batteries to achieve full performance. This temperature range is also the most efficient, reliable, and safe range for battery operation.

click for full size image

Figure 1. Power map chart shows the power limits of your battery or battery pack across temperature range. (Source: Kandler Smith, NREL milestone report, 2008).

When to use a data acquisition (DAQ) system for monitoring battery temperature

A data acquisition (DAQ) system is one of the most versatile instruments to measure the temperature of an individual object or multiple objects. A DAQ system monitors temperature at multiple points in a product’s battery system. Typically, you initially test functional design blocks independently, and then you test sub-integrated design blocks during a product design and development stage. Testing for lab battery packs and systems occurs during an early product design cycle using several common R&D lab instruments.

A DAQ system can be used to:

  • monitor temperature at multiple points in a product’s battery system,
  • charge the battery system with a DC power supply, and
  • use a DC electronic load to discharge the battery system.

Figure 2 below shows a common lab setup using a DAQ system.  If you happen to own a bidirectional DC power supply that can source and sink current, then you can replace the separate DC power supply and DC electronic load with a bidirectional DC power supply.

click for full size image

Figure 2. Lab test setup for product battery system test using a DAQ, DC power supply, and DC electronic load. (Source: Keysight Technologies)

Figure 3 below shows an example of PC-based data acquisition software that complements the DAQ hardware to improve productivity. Using such a data acquisition software application, you can quickly set up and execute tests and get results faster. Some PC data application software allows you to graphically build automated tests, and reduces test development time significantly. The software basically enables graphically intuitive instrument settings, sequencing of measurements, and interacts with multiple instruments to help you create your own complete automated test.

click for full size image

Figure 3. Keysight PathWave BenchVue PC data acquisition software graphical interface. (Source: Keysight Technologies)

The example in Figure 3 shows a PC-based data acquisition software that allows you to:

  • Test the battery management system in your devices by varying the charging sources and discharging the electronic load, while monitoring the temperature and behaviour of your battery system.
  • Perform multiple temperature point measurements to evaluate cell-to-cell temperature variations.
  • Set alarm triggers to monitor temperature, voltages, or currents if they go above or below acceptable limits.

When to use a specialized battery test system for monitoring battery temperature

Performing quick workarounds on bench test instruments may serve you well for quick troubleshooting and verifying your battery system design. However, when you need to run comprehensive and reliable battery tests that meet standards compliance and conformance tests, use a specialized battery test system that comes with a dedicated centrally controlled battery test software.

A dedicated and well-supported specialized battery test system is needed to provide reliable and precise testing of battery systems, whether they are in the cell, module, or at the pack level. A good battery test system can run customized performance, function, aging, and environmental tests.

Figure 4 below shows an example of a specialized battery test system that is scalable from individual stand-alone solutions to fully integrated test systems and ready-to-use test laboratories.

click for full size image

Figure 4. Keysight Scienlab SL100XA Series battery test system. (Source: Keysight Technologies)

The battery pack test system, as shown in Figure 4, for example, is scalable up to 1000 V, ± 2400 A, and ± 360 kW. Scalability is a very important factor for protecting your test hardware investments. The battery test system must also be flexible and suitable for various energy storage applications such as automobile transportation to industrial and other large on premise use cases.

A good battery test system comes with integrated test environments for your device under test (DUT), such as temperature and climate chambers, conditioning for your DUT, and standardized contacting systems for easy integration to your DUT. It is also important to have built-in safety and security mechanisms to help you avoid potentially hazardous situations.

A central battery test system software is also essential to control individual or multiple fully integrated battery test systems for cells, modules, and packs. A good web-based central battery test system software will also be able to:

  • Control and monitor all components in the test environment
  • Customize test procedures with the availability of predefined standard tests
  • Execute test measurements with data recording complete with time stamp for synchronous analysis
  • Provide power visualization of measurement data

Ultimately, the central battery test system software should permit validation tests that meet all standard-compliant tests (for example, International Organization for Standardization (ISO), Deutsches Institut für Normung European Standards (DIN EN), and the Society of Automotive Engineers (SAE).

Summary

Monitoring battery temperature is necessary throughout the battery system’s product life cycle. During the early stages of the product life cycle, engineers can quickly troubleshoot and validate their battery system designs with bench instruments such as a DAQ in conjunction with a current sourcing and sinking DC power supply. During the characterization and qualification stages of the product life cycles, a specialized battery test solution becomes invaluable to help you ensure a comprehensive, reliable, and volume scalable test solution.

This article was originally published on Embedded.

Bernard Ang has been with Keysight Technologies (previously Hewlett Packard and Agilent Technologies) for more than 29 years. Bernard held roles in manufacturing test engineering, product engineering, product line manager, product development manager, product support manager, and product marketing. He is currently a product marketer focusing on data acquisition systems, function generators, and digital multimeter product solutions. Bernard received his Bachelor of Electrical Engineering from Southern Illinois University, Carbondale, Illinois.

 

Virtual Event - PowerUP Asia 2024 is coming (May 21-23, 2024)

Power Semiconductor Innovations Toward Green Goals, Decarbonization and Sustainability

Day 1: GaN and SiC Semiconductors

Day 2: Power Semiconductors in Low- and High-Power Applications

Day 3: Power Semiconductor Packaging Technologies and Renewable Energy

Register to watch 30+ conference speeches and visit booths, download technical whitepapers.

Leave a comment